Ramguard's permanent fixed range of bollards are designed for the protection and safety of pedestrians, buildings and utilities. They are primarily used where vehicle access is not required but control is necessary. These bollards are made from 350 grade galvanized steel, in round or square and powder coated. Our standard colours are bright red and safety yellow but also include a range of custom colours when required. Bollards are available in a wide range of sizes, shapes and heights. Permanent fixed bollards can be installed through concrete slabs, footpaths, driveways or directly into bitumen or garden beds. The increased strength of these bollards come from their footing design and concrete filled reinforcement. |
|
PFI
The PF1 is our most popular permanent fixed bollard where low to medium impact protection is required.
They are commonly installed in front of shops, factories, car parks and car yards. These bollards come in either 115mm round diameter or 100mm square both with a 4mm wall thickness. |
|
PF2
The PF2 permanent fixed bollard offers a greater level of strength and protection. This is due to its larger diameter of 140mm and deeper footings. These bollards are ideally installed in pedestrian access areas, for building protection or where a higher level of security is required.
They may also be used in the protection of hydrants and small power boxes. The SPF2 in this range is our 125mm square bollard with a wall thickness of 5mm. |
|
PF3
The PF3 are the largest of our permanent fixed bollard range. With a wall thickness of 5mm, our round bollard has a 165mm diameter while our square is 150mm. These bollards are primarily installed where a higher impact protection is required such as where trucks and heavy machinery are in use. They are also used to provide a safety barrier around power transformers, hydrant booster valves, buildings and pedestrian areas. We can provide larger bollards outside of our standard range for custom applications. |
|
|
|
PFSS
Our stainless steel range of permanent fixed bollards can be supplied in either a high polished or brush finish sleeve. These sleeves are designed to fit over our PF1 and PF2 range, offering a modern clean look, with security protection and minimal maintenance. This range of stainless steel bollards are commonly used in entrances for shopping centres, office buildings and hotels as well as pathways and walkways. These SS sleeves can also be used without PF1 and PF2 inserts. |
|
|
